Improving Machine Efficiency at PT PID Ongkowidjojo
OEE and FMEA Analysis Leading to Significant Gains in Primary Stage 3
DOI:
https://doi.org/10.33479/sakti.v4i2.96Keywords:
Cigarette primary processing, Equipment effectiveness, Failure Mode and Effect Analysis (FMEA), Six big losses, Overall Equipment Effectiveness (OEE)Abstract
This study aims to enhance equipment effectiveness in the primary cigarette manufacturing process at PT. PID Ongkowidjojo, focusing on Stage 3, a critical production phase with significant downtime due to equipment failures. Using Overall Equipment Effectiveness (OEE) and Failure Mode and Effects Analysis (FMEA), the research identified nine key failure modes affecting interconnected machines. Based on these findings, targeted improvements were implemented, including scheduled maintenance, real-time monitoring, periodic cleaning, and spare parts inventory management. As a result, the OEE value increased from 50.52% to 56.57%, driven by improvements in Availability (71.07% to 79.22%) and Quality Rate (92% to 93.36%), despite a slight decline in Performance Rate (77.20% to 76.25%). This study highlights the importance of integrating OEE and FMEA methodologies to reduce downtime and address equipment inefficiencies. By tackling the Six Big Losses, particularly equipment failures, this approach offers actionable insights for maintaining operational efficiency and fostering continuous improvement in manufacturing systems.
References
Alijoyo, A., Wijaya, B., & Jacob, I. (2017). Failure Mode Effect Analysis: Analisis Modus Kegagalan dan Dampak. CRMS Indonesia. Bandung, Indonesia. Retrieved from https://lspmks.co.id/wpcontent/uploads/2020/06/Failure-Modes-and-Effects-Analysis.pdf
Alriva, D., Helianty, Y., & Prassetiyo, H. (2015). Usulan peningkatan Overall Equipment Effectiveness (OEE) pada mesin tapping manual dengan meminimumkan six big losses. Jurnal Online Institut Teknologi Nasional, 3(3), 240–251. Retrieved from https://ejurnal.itenas.ac.id/index.php/rekaintegra/article/view/888
Ariyah, H. (2022). Penerapan metode Overall Equipment Effectiveness (OEE) dalam peningkatan efisiensi mesin batching plant (Studi kasus: PT. Lutvindo Wijaya Perkasa). Jurnal Teknologi dan Manajemen Industri Terapan, 1(2), 70–77. https://doi.org/10.55826/tmit.v1iII.10
Exor. (2013). The complete guide to simple OEE. DataVisor. Cincinnati, OH. Retrieved from https://www.cmafh.com/enewsletter/PDfs/TheCompleteGuidetoSimpleOEE.pdf
Fadhlullah, F., Noya, S., & Putrianto, N. K. (2024). Production quality control analysis of pipe water inlet EW010 using Six Sigma and Failure Mode and Effect Analysis (Case study: PT Wijaya Karya Industri dan Konstruksi). Jurnal Sains dan Aplikasi Keilmuan Teknik Industri (SAKTI), 4(1), 1–18. https://doi.org/10.33479/jtiumc.v4i1.87
Kurniarso, A., & Azwir, H. H. (2014). Minimasi waste material tembakau pada proses pembuatan rokok di PT. HM. Sampoerna Tbk. President University Repository. Retrieved from http://repository.president.ac.id/xmlui/handle/123456789/1170
Nakajima, S. (1988). Introduction to total productive maintenance (TPM). Productivity Press. Minnesota, USA.
Nurkertamanda, D., & Wulandari, F. T. (2009). Analisa moda dan efek kegagalan (Failure Mode and Effects Analysis/FMEA) pada produk kursi lipat Chitose Yamato Haa. JATI Undip: Jurnal Teknik Industri, 4(1), 49–64. https://doi.org/10.12777/jati.4.1.49-64
Nurwulan, N. R., & Fikri, D. K. (2020). Analisis produktivitas dengan metode OEE dan six big losses: Studi kasus di tambang batu bara. Jurnal IKRA-ITH Ekonomika, 3(3), 30–35. https://doi.org/10.37817/ikraith-ekonomika.v3i3.1036
Pramono, E., Noya, S., & Ekawati, Y. (2024). Defect analysis in the secondary section of PT PID Ongkowidjojo using Failure Mode and Effect Analysis and Fault Tree Analysis. Jurnal Sains dan Aplikasi Keilmuan Teknik Industri (SAKTI), 4(1), 19–32. https://doi.org/10.33479/jtiumc.v4i1.88
Pranowo, I. D. (2019). Sistem dan manajemen pemeliharaan. Deepublish. Yogyakarta, Indonesia.
Saw Shu Zen, A. U., Purnomo, & Ekawati, Y. (2024). Analisis efektivitas mesin cetak flexo menggunakan metode Overall Equipment Effectiveness berbasis six big losses pada industri corrugated box. Jurnal Sains dan Aplikasi Keilmuan Teknik Industri (SAKTI), 4(1), 33–40. https://doi.org/10.33479/jtiumc.v4i1.71
Stamatis, D. H. (2010). The OEE primer: Understanding overall equipment effectiveness, reliability, and maintainability. Productivity Press. New York. Retrieved from http://www.mescenter.ru/images/abook_file/The_OEE_Primer.pdf
Triwardani, D. H., Rahman, A., & Tantrika, C. F. M. (2017). Analisis Overall Equipment Effectiveness (OEE) dalam meminimalisasi six big losses pada mesin produksi dual filters DD07. Jurnal Rekayasa dan Manajemen Sistem Industri, 1(2), 379–391. Retrieved from http://jrmsi.studentjournal.ub.ac.id/index.php/jrmsi/article/view/44
Wawolumaja, R., & Rudianto, M. (2013). Diktat kuliah pengendalian & penjaminan kualitas (Ie-501): Failure Mode & Effect Analysis (FMEA). Universitas Kristen Maranatha. Bandung. Retrieved from https://dosen.itats.ac.id/ulum/wp-content/uploads/sites/29/2017/05/Materi-Quality-Control.pdf
