Usulan Perbaikan Sistem Kerja dengan Micromotion Study dan Analisis Pengaruh Pencahayaan Terhadap Kecepatan Kerja PT Dwi Putra Perkasa Malang

Authors

  • Jordy Ariesandy Industrial Engineering Universitas Ma Chung
  • Teguh Oktiarso Industrial Engineering Universitas Ma Chung
  • Yurida Ekawati Industrial Engineering Universitas Ma Chung https://orcid.org/0000-0002-7759-6119

DOI:

https://doi.org/10.33479/jtiumc.v2i1.26

Keywords:

Lighting, Micromotion study

Abstract

PT Dwi Putra Perkasa is one of the large convection companies in Malang City, East Java. The increasingly fierce competition in the industrial world requires companies to continue to improve their business. The implementation of a good and ergonomic system is one of the main factors that support the progress of a business. There are two problems identified at PT Dwi Putra Perkasa. First, a less structured work system makes workers less optimal in doing work. Second Uncertain natural lighting affects the performance of workers. This research was conducted with two methods, namely micromotion study for work system problems and experimental design methods using a complete random design to determine the effect of lighting. The results of the analysis showed that through the micromotion study method there was an increase in efficiency at each station, namely: Station 1 was 102.93%, Station 2 was 125.38%, Station 3 was 112.31%, and Station 4 was 105.98%. While through the experimental design it was found that performance at station one was not affected by light intensity while stations 2, 3, and 4 were affected. In addition it can also be concluded that the lamp used is a lamp with a light intensity of 140 lux.

References

Faritsy, A. Z. A., Nugroho, Y. A., 2017. Pengukuran lingkungan kerja fisik dan operator untuk menentukan waktu istirahat kerja. Jurnal Ilmiah Teknik Industri, Volume 16(2), pp. 108-114. Diakses dari: https://doi.org/10.23917/jiti.v16i2.3379

Groover, M., 2007. Work System and The Methods, Measurement, and Management of Work. Pearson, New Jersey

Montgomery, D.C., 1997. Design and Analysis of Experiments, 4th ed. John Wiley & Sons, New York

Rinawati, D. I., Puspitasari, D., Muljadi. F. 2012. Penentuan waktu standar dan jumlah tenaga kerja optimal pada produksi batik cap. Jati Undip: Jurnal Teknik Industri, Volume 7(3), pp. 143-150. Diakses dari: https://doi.org/10.12777/jati.7.3.143-150

Soejanto, I., 2009. Desain eksperimen dengan metode taguchi. Yogyakarta: Graha Ilmu

Suma’mur., 2009. Hiegiene perusahaan dan keselamatan kerja. Jakarta: CV Sagung Seto

Sutalaksana, I. Z., 1979. Teknik tata cara kerja,.Institut Teknologi Bandung. Bandung

Tarwaka, Sholichul, & Sudiajeng. L., 2004. Ergonomi untuk keselamatan, kesehatan Kerja dan produktivitas. UNIBA PRESS, Surakarta

Downloads

Published

06.06.2022

Issue

Section

Articles